Description
The ATW-2110B/P Wireless System comprises of ATW-R2100b receiver, ATW-T210a UniPak® body-pack transmitter and an AT829cW cardioid condenser lavalier microphone.
Audio-Technica's second generation of the well known 2000 Series now offers increased RF power on the beltpack transmitters for increased link stability. Charging contacts on the transmitters allow easy operation with rechargeable batteries. The 12VDC bias voltage on both BNC antenna inputs allows operation with the ATW-B80 antenna booster or other active components.With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before. Automatic frequency scanning - standard on all 2000b Series wireless receivers - finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000b Series offers another ease-of-use feature: any of its 10 channels may be used together - eliminating confusing frequency groups and other frequency-coordination problems.
Key Features:
- Automatic frequency scanning finds an open channel at the touch of a button
- Up to 10 user selectable channels are available
- Compatibility varies from country to country
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock™ squelch function fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
Specifications:
Overall System
- Number Of Channels 10 total
- Frequency Stability ±0.005%, Phase Lock Loop frequency control
- Modulation Mode FM
- Frequency Response 100 Hz to 15,000 Hz
- Operating Range 100 m (300') typical
- Operating Temperature Range 41° F (5° C) to 113° F (45° C)
Receiver
- Receiving System True Diversity
- Image Rejection 55 dB nominal, 50 dB minimum
- Signal-To-Noise Ratio >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz
- Sensitivity 20dBµV (S/N 60dB at 5 kHz deviation, IEC-weighted)
- Total Harmonic Distortion ≤ 1% (at 1 kHz, ±20 kHz deviation)
- Audio Output Attenuator (ATTN) Unbalanced: 25mV (100k ohms load), 1/4" phone jack
- Balanced: 50mV (Attenuator; 0dB)
- 12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz deviation, 100k ohm load, XLRM-type
- Antenna Input BNC-type 50 Ω - Bias voltage 12V DC, 60mA each
- Dimensions 210 mm x 44 mm x 162.2 mm (W x H x D)
- Weight 1.0kg
- Accessories Included Two flexible UHF antennas, rack mount adapters, AC adapters
Belt Pack
- RF Power Output High: 30mW; Low: 10mW, nominal
- Spurious Emissions According to National Regulations
- Battery Type 1.5V AA alkaline or rechargeable AA NiMH (not included)
- Current Consumption 150 mA typical
- Battery Life Approximately 9 hours (low), 7 hours (high)
- Dimensions 66 mm x 92.3 mm x 22.5 mm (W x H x D)
- Net Weight 80g
AT829cW Microphone
- Element Condenser
- Polar Pattern Cardioid
- Weight 2.4 g (0.1 oz)
- Dimensions 24mm long, 10.5mm diameter
- Output Connector HRS 4-pin connector for A-T UniPak® body-pack wireless transmitters
- Cable 55" (1.4 m) Cable permanently attached to mic
- Accessories Included AT8131 foam windscreen; AT8434 clothing clip
